Close
Login to Your Account
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2016
    Location
    Süd-Deutschland
    Posts
    91
    Downloads
    0
    Uploads
    0

    Which Material to programm for Dimension sst 1200 / SST 768 (without es)

    I need to programm some chips for a Dimension 1200. Machine type is Prodigy, right?! But which material should I chose to programm to the chip?

    Here is the List of the material.py

    id_to_name = ["unknown"] * 0x1000
    id_to_name[0x00] = "ABS"
    id_to_name[0x01] = "ABS_RED"
    id_to_name[0x02] = "ABS_GRN"
    id_to_name[0x03] = "ABS_BLK"
    id_to_name[0x04] = "ABS_YEL"
    id_to_name[0x05] = "ABS_BLU"
    id_to_name[0x06] = "ABS_CST"
    id_to_name[0x07] = "ABSI"
    id_to_name[0x08] = "ABSI_RED"
    id_to_name[0x09] = "ABSI_GRN"
    id_to_name[0x0a] = "ABSI_BLK"
    id_to_name[0x0b] = "ABSI_YEL"
    id_to_name[0x0c] = "ABSI_BLU"
    id_to_name[0x0d] = "ABSI_AMB"
    id_to_name[0x0e] = "ABSI_CST"
    id_to_name[0x0f] = "ABS_S"
    id_to_name[0x10] = "PC"
    id_to_name[0x11] = "PC_RED"
    id_to_name[0x12] = "PC_GRN"
    id_to_name[0x13] = "PC_BLK"
    id_to_name[0x14] = "PC_YEL"
    id_to_name[0x15] = "PC_BLU"
    id_to_name[0x16] = "PC_CST"
    id_to_name[0x17] = "PC_S"
    id_to_name[0x18] = "ULT9085"
    id_to_name[0x19] = "ULT_RED"
    id_to_name[0x1a] = "ULT_GRN"
    id_to_name[0x1b] = "ULT_BLK"
    id_to_name[0x1c] = "ULT_YEL"
    id_to_name[0x1d] = "ULT_BLU"
    id_to_name[0x1e] = "ULT_CST"
    id_to_name[0x1f] = "ULT_S"
    id_to_name[0x20] = "PPSF"
    id_to_name[0x21] = "PPSF_RED"
    id_to_name[0x22] = "PPSF_GRN"
    id_to_name[0x23] = "PPSF_BLK"
    id_to_name[0x24] = "PPSF_YEL"
    id_to_name[0x25] = "PPSF_BLU"
    id_to_name[0x26] = "PPSF_CST"
    id_to_name[0x27] = "PPSF_S"
    id_to_name[0x28] = "ABS_SS"
    id_to_name[0x29] = "P401"
    id_to_name[0x2a] = "P401_RED"
    id_to_name[0x2b] = "P401_GRN"
    id_to_name[0x2c] = "P401_BLK"
    id_to_name[0x2d] = "P401_YEL"
    id_to_name[0x2e] = "P401_BLU"
    id_to_name[0x2f] = "P401_CST"
    id_to_name[0x30] = "ABS_SGRY"
    id_to_name[0x31] = "ABS_GRY"
    id_to_name[0x32] = "ABSI_GRY"
    id_to_name[0x3c] = "P430"
    id_to_name[0x3d] = "P430_RED"
    id_to_name[0x3e] = "P430_GRN"
    id_to_name[0x3f] = "P430_BLK"
    id_to_name[0x40] = "P430_YEL"
    id_to_name[0x41] = "P430_BLU"
    id_to_name[0x42] = "P430_CST"
    id_to_name[0x43] = "P430_GRY"
    id_to_name[0x44] = "P430_NYL"
    id_to_name[0x45] = "P430_ORG"
    id_to_name[0x46] = "P430_FLS"
    id_to_name[0x47] = "P430_IVR"
    id_to_name[0x50] = "ABS-M30I"
    id_to_name[0x51] = "ABS-ESD7"
    id_to_name[0x5a] = "NYL12"
    id_to_name[0x64] = "PCABSWHT"
    id_to_name[0x65] = "PCABSRED"
    id_to_name[0x66] = "PCABSGRN"
    id_to_name[0x67] = "PC-ABS"
    id_to_name[0x68] = "PCABSYEL"
    id_to_name[0x69] = "PCABSBLU"
    id_to_name[0x6a] = "PCABSCST"
    id_to_name[0x6b] = "PCABSGRY"
    id_to_name[0x78] = "SR20"
    id_to_name[0x82] = "PC_SR"
    id_to_name[0x8c] = "ABS-M30"
    id_to_name[0x8d] = "M30_RED"
    id_to_name[0x8e] = "M30_GRN"
    id_to_name[0x8f] = "M30_BLK"
    id_to_name[0x90] = "M30_YEL"
    id_to_name[0x91] = "M30_BLU"
    id_to_name[0x92] = "M30_CST"
    id_to_name[0x93] = "M30_GRY"
    id_to_name[0x94] = "M30_SGRY"
    id_to_name[0x95] = "M30_WHT"
    id_to_name[0x96] = "M30_SIL"
    id_to_name[0xa0] = "ABS_S_2"
    id_to_name[0xaa] = "ABS_SS_2"
    id_to_name[0xab] = "SR30"
    id_to_name[0xad] = "ULT_S2"
    id_to_name[0xae] = "SR-100"
    id_to_name[0xb4] = "PC-ISO"
    id_to_name[0xbe] = "PC-ISO-T"
    id_to_name[0xbf] = "P1_5M1"
    id_to_name[0xc0] = "P1_5M2"
    id_to_name[0xc1] = "P1_5M3"
    id_to_name[0xc6] = "RDdev"
    id_to_name[0xc7] = "RDdev-S"
    id_to_name[0xc8] = "RD1"
    id_to_name[0xc9] = "RD2"
    id_to_name[0xca] = "RD3"
    id_to_name[0xcb] = "RD4"
    id_to_name[0xcc] = "RD5"
    id_to_name[0xcd] = "RD-S1"
    id_to_name[0xce] = "RD-S2"
    id_to_name[0xcf] = "RD-S3"
    id_to_name[0xd0] = "RD-S4"
    id_to_name[0xd1] = "RD-S5"
    id_to_name[0xfa] = "uP430"
    id_to_name[0xfb] = "uP430_RED"
    id_to_name[0xfc] = "uP430_GRN"
    id_to_name[0xfd] = "uP430_BLK"
    id_to_name[0xfe] = "uP430_YEL"
    id_to_name[0xff] = "uP430_BLU"
    id_to_name[0x100] = "uP430_GRY"
    id_to_name[0x118] = "SR30XL"
    id_to_name[0x119] = "P430XL_IVR"
    id_to_name[0x11a] = "P430XL"
    id_to_name[0x11b] = "P430XL_RED"
    id_to_name[0x11c] = "P430XL_GRN"
    id_to_name[0x11d] = "P430XL_BLK"
    id_to_name[0x11e] = "P430XL_YEL"
    id_to_name[0x11f] = "P430XL_BLU"
    id_to_name[0x12c] = "ASA"
    id_to_name[0x12d] = "ASA_BLK"
    id_to_name[0x12e] = "ASA_LGRY"
    id_to_name[0x12f] = "ASA_RED"
    id_to_name[0x130] = "ASA_BLU"
    id_to_name[0x131] = "ASA_GRN"
    id_to_name[0x132] = "ASA_WHT"
    id_to_name[0x133] = "ASA_YEL"
    id_to_name[0x134] = "ASA_ORG"
    id_to_name[0x135] = "ASA_DGRY"
    id_to_name[0x136] = "ULT1010"
    id_to_name[0x137] = "U1010BLK"
    id_to_name[0x138] = "U1010S1"
    id_to_name[0x1f4] = "ABS-M30_2"
    id_to_name[0x1f7] = "M30_BLK_2"
    id_to_name[0x208] = "PC_2"
    id_to_name[0x212] = "ULT9085_2"
    id_to_name[0x226] = "ASA_2"
    id_to_name[0x227] = "ASA_BLK_2"
    id_to_name[0x244] = "NYL12_2"
    id_to_name[0x384] = "SR30_2"
    id_to_name[0x385] = "SR-110"
    id_to_name[0x386] = "PC_S_2"
    id_to_name[0x387] = "ULT_S_2"
    Last edited by akb; 08-10-2016 at 01:53 AM.
    Refill gewuenscht? PM auch gerne auf Deutsch!
    Printer: Stratasys Dimension sst 1200es | HP Designjet 3D (aka Stratasys uPrint)
    Refill-Systems: RPi 3 B & Arduino UNO clone

  2. #2
    Join Date
    Jun 2016
    Location
    Süd-Deutschland
    Posts
    91
    Downloads
    0
    Uploads
    0
    Here is what I found out .... Material for sst 1200 still missing (P400?)

    id_to_name[0x07] = "ABSI" ----- Fortus 900mc / 400mc
    id_to_name[0x3c] = "P430" ---- 1200es
    id_to_name[0x11a] = "P430XL" ------ uPrint SE
    Refill gewuenscht? PM auch gerne auf Deutsch!
    Printer: Stratasys Dimension sst 1200es | HP Designjet 3D (aka Stratasys uPrint)
    Refill-Systems: RPi 3 B & Arduino UNO clone

  3. #3
    Join Date
    Mar 2016
    Location
    Posts
    6
    Downloads
    0
    Uploads
    0
    Prodigy

    ABS or
    401
    works fine
    change serial number
    56,3 it's full.

    For BST model support ABS_S

  4. #4
    Join Date
    Jun 2016
    Location
    Süd-Deutschland
    Posts
    91
    Downloads
    0
    Uploads
    0
    Thanks a lot.
    Refill gewuenscht? PM auch gerne auf Deutsch!
    Printer: Stratasys Dimension sst 1200es | HP Designjet 3D (aka Stratasys uPrint)
    Refill-Systems: RPi 3 B & Arduino UNO clone


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEED HELP Stratasys Dimension (NOT SST/BST/ELITE/1200) Boot problem
    By 3D'Em in forum Stratasys
    Replies: 20
    Last Post: 03-29-2017, 07:43 PM
  2. NEED HELP Dimension SST 1200 Hard Drive
    By eighty6ta in forum Stratasys
    Replies: 16
    Last Post: 09-22-2016, 04:03 PM
  3. Replies: 5
    Last Post: 09-22-2016, 11:01 AM
  4. FAQ Dimension SSt 1200 ES (and others) ERROR CODES
    By qtidesign in forum Stratasys
    Replies: 1
    Last Post: 09-21-2015, 05:45 PM
  5. NEED HELP Stratasys dimension sst 1200
    By innolaser.com in forum Stratasys
    Replies: 8
    Last Post: 05-22-2015, 05:00 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •