Close
Login to Your Account
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2017
    Location
    Posts
    9
    Downloads
    0
    Uploads
    0

    Dimension 1200 SST Extrusion Rate Rest Help Please

    I switched to HIPS support and then switched the tips and ran the calibration.

    I think the machine measured the height and then changed the extrusion rate.

    If i print one of the sample files in the machine memory it works fine.

    If I try to print anything from Insight it prints a solid first layer of support and then the second layer of support extrudes material so fast it breaks at the start of the tip tube and curls into the head.

    Anyone know how to adjust or rest the extrusion rate?

    Again the machine is a Dimension 1200 SST.

    Thanks in advance

  2. #2
    Join Date
    Dec 2017
    Location
    Posts
    9
    Downloads
    0
    Uploads
    0
    Solution:

    I had set the support temperature to 250 C and when I changed it to 300 C, it solved the issue.

    So it was most likely a melt flow rate issue and raising the temperature fixed it.

  3. #3
    Join Date
    Jul 2017
    Location
    Posts
    5
    Downloads
    0
    Uploads
    0
    I use HIPS with no mod on the machine.
    How do you change extrusion temp? I have used Maraca, but on my bst1200es it is not seems to work, when the job starts the setting point is always 300C for both extruders

  4. #4
    Join Date
    Jul 2019
    Location
    Posts
    12
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Alesmine View Post
    I use HIPS with no mod on the machine.
    How do you change extrusion temp? I have used Maraca, but on my bst1200es it is not seems to work, when the job starts the setting point is always 300C for both extruders
    I think this is not possible to change in Maraca. My prints also print initially at 300C then go to the set temps. I don't have a problem with this using eSun hips, and it sticks great to the base with PVA glue on it.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dimension SST 1200 network
    By fdv99 in forum Fused Deposition Modeling (FDM) 3D Printers
    Replies: 2
    Last Post: 11-15-2019, 01:54 PM
  2. NEED HELP Adjust Extrusion Rate for slightly thinner Filament
    By faheus in forum Stratasys
    Replies: 2
    Last Post: 03-13-2018, 09:44 AM
  3. NEED HELP Stratasys Dimension Elite extrusion problem
    By gzan59 in forum Fused Deposition Modeling (FDM) 3D Printers
    Replies: 27
    Last Post: 01-06-2017, 04:29 PM
  4. NEED HELP Dimension 1200 SST fault
    By Howard in forum Stratasys
    Replies: 5
    Last Post: 09-22-2016, 08:27 AM
  5. NEED HELP Stratasys dimension sst 1200
    By innolaser.com in forum Stratasys
    Replies: 8
    Last Post: 05-22-2015, 04:00 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •