Close
Login to Your Account
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2014
    Location
    Melbourne, Australia
    Posts
    13
    Downloads
    0
    Uploads
    0

    Mini Kossel - Low cost bearing alternative

    Playing with some ideas for alternative bearing to the recommended Hiwin linear rails for the Kossel mini.

    Here is what I have so far,

    Used the carriages for the Graber dual V wheels, in place of the V wheels though, I've used two 623 bearings and an O-Ring with a 4mm section diameter. The carriage moves quite well, there is a little flex from the rubber o-rings but it doesn't look like it affects the vertical movement. I think it would benefit from a larger oring section but that will need a new carriage as the "wheels" will get bigger, I may design one when I get a chance.

    I might build up a machine, or changeover the bearing in my Kossel to see how they work. The bearings and O-Rings cost me $22AUD

    I've used in order of assembly, M3x35 screws (30 would be better), 2x M3 washers, 1 x M3 Nut, 623 bearing, M3 nut, M3 washer, 623 bearing, M3 Nylock. Hope that makes sense, with this combination the carriage is offset from the rail the same distance as if using a Hiwin rail.
    Attached Images Attached Images

  2. #2
    Join Date
    Apr 2014
    Location
    Posts
    6
    Downloads
    0
    Uploads
    0
    Nice Idea. I struggled trying to find a homebrew solution to "smoothly" running on the extruded aluminum (mine is painted and has a slightly rough texture). I would probably be concerned with the o-rings developing flat spots and getting sloppy. could you add spring loading to the effector to keep things tight as they wear?


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Up! mini gears
    By AFenerty in forum 3D Models & Print Gallery
    Replies: 10
    Last Post: 06-26-2015, 10:39 PM
  2. Mini Kossel?
    By Revwarguy in forum Rostock 3D Printer
    Replies: 4
    Last Post: 04-01-2014, 09:51 PM
  3. RAVE Be Kossel - Delta 3D model
    By jalessi in forum 3D Models & Print Gallery
    Replies: 1
    Last Post: 03-15-2014, 02:29 AM
  4. DISCUSSION cost
    By theamericono in forum Beginners (New to 3D Printing)
    Replies: 11
    Last Post: 02-27-2014, 01:46 PM
  5. NEED HELP Kossel Clear by Blue Eagle Labs
    By camfather in forum General 3D Printer Discussion
    Replies: 0
    Last Post: 01-04-2014, 01:08 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •